 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ADAM-4541/4542 Features * * * * * * * * * * * * * * * Fiber Optic to RS-232/ 422/485 Converter Compact size economizes space Direct plug-and-play Easily mounted on a DIN-rail, panel or piggyback Transmission speeds of up to 115.2 Kbps Optical fibers enable transmission of 2.5 km for ADAM-4541 and 15 km for ADAM-4542 Half/Full-duplex, bidirectional transmission mode Avoids lightning strikes and EMI/RFI interference Prevents damage from electrostatic discharge Stable and error-free data transmission Automatic internal RS-485 bus supervision No external flow control signals required for RS-485 Transient suppression and over-current protection on RS-422/ 485 data lines Reserved space for termination resistors LED for power and data flow indication Power requirement: +10 to + 30 VDC Introduction Fiber optic transmission offers the benefits of wide bandwidth, immunity to EMI/RFI interference, and secure data transmission. ADAM-4541/ ADAM-4542 can be used as an RS-232/422/485 point-to-point or pointto-mutipoint connection for transmitting and converting full/half-duplex signals and their equivalents within a fiber optic environment. Fiber optics is the perfect solution for applications where the transmission medium must be protected from electrical exposure, lightning, atmospheric conditions or chemical corrosion. The ADAM-4541/4542 is specifically designed to link various machinery equipped with an RS-232/422/485 communication ports (such as computer systems or manufacturing machines). Using standard ST connectors, the module's fiber optic ports can accommodate a wide range of fiber optic cable sizes, including 62.5/125 (9/125) m. High Bandwidth * Future signal capacity expansion Specifications ADAM-4541 Fiber Optics Wavelength Transmission Distance Optical Power Budget (attenuation) Power Consumption multi-mode 820 nm 2.5 km 12.5 dB 1 W (typical); 1.5 W (max.) ADAM-4542 single-mode 1310 nm 15 km 9 dB 1.6 W (typical); 2.1 W (max.) Advantages of Fiber Optics All Dielectric * * * * Low signal radiation Secure transmission Lightning immunity High-voltage installation * * * * * * * * * Small Size * Less duct space * Fewer additional ducts installed Low Attenuation * Greater distance / fewer repeaters * Less installation and maintenance Casing: ABS with captive mounting hardware Communication mode: Asynchronous Connector: Plug-in screw terminal Fiber port: ST Transmission mode: Full/half-duplex, bidirectional Transmission rate: Up to 115. 2 Kbps Operating temperature: -10 ~ 70 C (14 ~ 158 F) Operating humidity: 5 ~ 95% (non-condensing) Accessories (included): Nylon DIN-rail mounting adapter, SECC panel mounting bracket Ordering Information ADAM-4541: Mulit-Mode Fiber optic to RS-232/422/485 converter with mounting bracket ADAM-4542: Single-Mode Fiber optic to RS-232/422/485 converter with mounting bracket Optical Signals * No ground loops * No spark hazard * Operation in flammable areas 6-24 Daughterboards and Modules |
Price & Availability of ADAM-4541
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |